Saturn Rafts
We've improved upon the design of our 2010 models with the following modifications:
- 4-angled d-rings for strapping of the frame
- 70% heavier bottom half of boat, wraps all the way up to the bumper guard
- New "soft handles" - two on each side, one on each end, total of six
- Valves on outside instead of inside
We have a limited number of 2010 Saturn Rafts available NOW, but QUANTITIES ARE LIMITED. Once these are out the door, we'll be shipping additional orders in early April. Please call 1-888-976-7238 if you have questions or concerns.
Currently in stock:
| Saturn RD430 14' Self Bailing Raft, blue ONLY FIVE IN STOCK |
$1,499 + $139 S&H |
|
| Saturn RD430 14' Self Bailing Raft, red ONLY ONE IN STOCK |
$1,499 + $139 S&H |
|
| Saturn 14'6" Self Bailing Raft, red ONLY ONE IN STOCK |
$1,599 + $149 S&H |
|
| Saturn 15' Self Bailing Raft, blue ONLY ONE IN STOCK |
$1,699 + $225 S&H |
|
| Saturn 15' Self Bailing Raft, red ONLY ONE IN STOCK |
$1,699 + $225 S&H |
Order online now or call 1-888-976-7238. If you are looking for something not listed, please contact us.
Specifications
Length |
13'0" |
14'0" |
14'6" |
15' |
Width |
5'9" |
6'8" |
6'10" |
7' |
Tube Diameter |
17.6" |
19.6" |
21" |
22.5" |
Top Tangent Length |
66" |
78" |
82" |
84" |
Center-to-Center Tube Width |
54" |
60" |
61" |
62" |
Air Chambers |
4 + 2 + 1 |
4 + 3 + 1 |
4 + 3 + 1 |
4 + 3 + 1 |
Self Bailing Floor |
Air Deck Floor (6psi) |
Air Deck Floor (6psi) |
Air Deck Floor (6psi) |
Air Deck Floor (6psi) |
Passenger Capacity |
8 |
8-10 |
8-10 |
8-10 |
Stainless Steel D-Rings |
12 |
12 |
12 |
12 |
Carrying Handles |
6 |
6 |
6 |
6 |
Removable Thwarts |
2 (Pin System) |
3 (Pin System) |
3 (Pin System) |
3 (Pin System) |
Rubber Strake Protection |
n/a |
Included Standard |
Included Standard |
Included Standard |
Extra PVC on Top Tubes |
66" x 8" |
80" x 10" |
84" x 10" |
84" x 10" |
Valves |
Halkey Roberts Type (NARU) |
Halkey Roberts Type (NARU) |
Halkey Roberts Type(NARU) |
Halkey Roberts Type(NARU) |
Pressure Relief Valves |
3 (1 Floor / 2 Tubes) |
3 (1 Floor / 2 Tubes) |
3 (1 Floor / 2 Tubes) |
3 (1 Floor / 2 Tubes) |
Nylon Foot Straps |
Included Standard |
Included Standard |
Included Standard |
Included Standard |
Nylon Carrying Bag |
Included Standard |
Included Standard |
Included Standard |
Included Standard |
Warranty |
2-Year Included |
2-Year Included |
2-Year Included |
2-Year Included |
Material Specifications
SATURN inflatable boats and rafts are made of 1,100 Dtex New Generation PVC fabric with polyester support, having excellent resistance to tearing, tension and breaking.

SATURN inflatable boats and rafts
are hand-sealed at the seams for
perfect seaming.
SATURN inflatable boats and rafts are hand-sealed at the seams for perfect seaming, the most expensive and reliable method used today. Each seam is strengthened with four layers of bonded fabric for maximum strength and durability. SATURN seams are virtually indestructible and will not fall apart, even after many years of use in any weather.
PVC Fabric vs. Hypalon?
PVC
Pro: significantly less expensive than Hypalon
Con: won't last as long in the direct sunlight as Hypalon (if left unprotected)
Hypalon
Pro: will last significantly longer than PVC when exposed to prolonged periods of direct sunlight
Con: significantly more expensive then PVC
Con: looses air over time due to its structure
There is no doubt that PVC fabric won’t last as long as Hypalon fabric if the boat is subjected to prolonged periods of direct sunlight and no measures have been taken to protect the PVC fabric from the sun (i.e., boat cover or UV protective spray). After a number of years in direct sunlight the PVC fabric can become sticky. After that it can also become discolored.

1100 Dtex polyester fabric

Outside PVC layers and
Inside high polyester fabric
Technical Specifications of PVC Fabric
- Adhesive structure
- Polyurethane glue
- Cold welding
- Made by hand
- Four layer reinforced seams
All SATURN inflatable boats, rafts and kayaks use 1100 Dtex polyester fabric which has been specially coated on both sides with PVC.
Outside PVC layers offer:
- Abrasion resistance
- Extreme condition resistance
- Chemical resistance
Inside high polyester fabric offers:
- Dimensional stability
- Tensile and tear strength
Abrasion resistance: The chemical formula of the outside PVC layer makes the material abrasive resistant and airtight properties, i.e., 200*170 N/5cm (± 20).
Extreme condition resistance:
Low and high temperature resistance, i.e.,
-30 + 70°C.
Chemical resistance: Strong resistance to Hydrocarbon, Sunlight, Seawater, Oil and Fuel. Thanks to this properties which protect the material from fading and ageing.
Dimensional stability: 1% (24hrs-70°C).
Tensile and tear strength: 3800*3550 (± 250).
![]() Abrasion resistance |
![]() Extreme condition resistance |
Chemical resistance |
![]() Dimensional stability Tensile and tear strength |
PVC Fabric Test Results
Test Conducted |
Result |
Test Method |
|
Warp |
Weft |
||
Tensile Strength |
533 lbs(240kg) |
533 lbs(240kg) |
FS-191A-5100(CRE) (GRAB TEST) |
|
40 lbs (18kg) |
40 lbs (18kg) |
FS-191A -5134(CRE) |
80 lbs (36kg) |
100 lbs (45kg) |
||
Adhesion Resistance (1inch) |
25-35 lbs (11-16kg) |
FS-191A-5970(CRE) |
|
Resistance to low Temperature |
No Cracking and Flecking |
MIL - C - 20696 (-40C, -40F) |
|
Colorfastness to Light |
80 hours exposure 6-7 Grade |
AATCC 16E Xenon-arc-lamp |
|
Resistance to Abrasion |
Weight Loss Face 1%, Back 1.3% |
Face 600 Cycle, Back 400 Cycle |
|
Test Method |
Test Item |
Unit |
Result |
- - - |
Application |
- - - |
Architecture |
- - - |
Item |
- - - |
ADT NO.00017 |
- - - |
Base fabric |
- - - |
1100 Dtex, Polyester |
- - - |
Coating material |
- - - |
PASTE |
- - - |
Fabric density |
Thread/Inch |
28 / 26 |
DIN 53352 |
Finished weight |
gr/㎡ |
1100 |
DIN 53353 |
Finished thickness |
m/m |
0.9 |
DIN 53354 |
Strip tensile |
Kgf/ 2Inch |
340 / 300 |
|
Elongation |
% |
22 / 35 |
DIN 53363 |
Trapezoid tear |
Kgf |
45 / 40 |
DIN 53357 |
Adhesion |
Kgf / Inch |
7.8/ 6.8 |
DIN 53361 |
Low temp. resistance |
degree C |
-25 |
- - - |
Warranty |
YEAR |
3 |
* Technical Info, Specifications and Accessories are subject to change without notice.
Colors Available
RM Rafts offers Saturn Rafts in Red, Yellow and Blue.
The following basic PVC colors are available for special orders. The Camouflage color costs $175 extra. Please call for details (1-888-976-7238).
|
|
|
|
|
|



black
yellow
blue
red
camo
gray 